Wheel Chocks for Caravans, Trailers, Motorbikes and 4WDs

Certified Excellence You Can Trust

ISO-certified in Quality, Sustainability, and Safety: with us your business always stays in trusted hands.

Why Certifications Matter Earning these certifications wasn’t just a checkbox for us — it’s proof of our commitment to excellence. ISO 9001:2015 = Quality you can trust ISO 14001:2015 = Sustainability you can believe in ISO 45001:2018 = Responsibility you can rely on Together, they demonstrate that Carewell Group is more than a packaging provider. We’re a certified partner for growth, helping your business deliver products safely, sustainably, and with confidence.

Our Customers

Most wheel chocks sold for caravans, trailers and personal vehicles are built to a price point, not a load rating, which is fine right up until the chock you’re relying on is the only thing stopping a loaded caravan from rolling on an uneven site. Carewell Group builds wheel chocks for mining trucks and heavy fleet vehicles, and we bring that same engineering down to the personal vehicle market: properly specified, properly rated, and built to actually hold, whether that’s a caravan, box trailer, motorbike, car or 4WD.

Why the chock under your tyre matters more than it looks

A wheel chock only has one job, and it only has to fail once. The gap between a chock that’s genuinely rated for the vehicle weight it’s holding and one that’s simply shaped like a wedge is invisible until the moment it matters, on a sloped caravan site, under a loaded trailer, or holding a motorbike upright while you work on it. Choosing a chock properly engineered for the actual weight and tyre size it’s protecting is a five-minute decision that removes a real risk, not an overcautious one.

Sizing your wheel chock correctly

The standard rule of thumb is straightforward: a wheel chock should sit at roughly 25% of your tyre’s overall height to engage properly against the tread without the wheel riding up and over it. A chock sized for a small trailer tyre won’t hold a caravan’s larger wheel the same way, and a chock sized for a caravan is unnecessarily bulky for a small box trailer. Specify to your actual tyre size and vehicle weight, not a single “one size fits most” default.

Choosing the right material

MaterialBest suited to
RubberGeneral caravan, trailer and car use, good grip across most surfaces and temperature ranges
Polyurethane (urethane)Higher load capacity and better long-term durability under repeated use, suits frequent towing and heavier caravans or trailers
PlasticLighter weight for easy storage, suits lower-weight trailers and occasional use rather than daily towing

A cheap plastic chock that cracks after a season of use costs more in replacements than a properly specified chock bought once, the same logic that applies to Carewell’s industrial range applies here, just at a smaller scale.

Wheel chocks for caravans and trailers

Caravans and box trailers need chocks sized to the actual wheel, not the tow vehicle, and most setups benefit from a pair rather than a single chock, placed on the downhill side when parked on a slope. A jockey wheel chock, specifically shaped to support the jockey wheel rather than the main tyre, is worth specifying separately if you’re levelling a caravan rather than just preventing roll. See our step-by-step placement guide for how to position chocks correctly on a slope.

Wheel chocks for motorbikes and trailers

A motorbike wheel chock serves a different purpose to a car or caravan chock, it’s usually supporting the bike upright on a trailer or in a workshop rather than just preventing roll, which means the chock needs to grip the front wheel securely enough to hold the bike’s weight without a rider balancing it. A chock built for this needs a snugger fit to the actual tyre profile than a general-purpose wedge.

Wheel chocks for cars and 4WDs

Car and 4WD chocks see the widest range of use, from parking on an incline to supporting a vehicle safely alongside a jack during maintenance. A chock used alongside jack stands should never replace them, it’s an added precaution against roll, not a substitute for a properly rated stand taking the vehicle’s weight.

Custom sizes and non-standard applications

Where a standard size genuinely doesn’t fit, an unusual tyre profile, a non-standard trailer axle, or a specific workshop application, Carewell can specify a custom wheel chock built to the actual requirement, the same custom engineering capability behind our industrial and mining range. See our custom wheel chock solutions for how this process works.

Common mistakes buying a wheel chock for personal use

A handful of mistakes come up often enough to name directly. Buying a chock sized for a different vehicle to the one it’s actually protecting, then wondering why it doesn’t hold properly. Treating a single chock as sufficient when a pair, used correctly on both sides of the wheel or across an axle, is the safer standard. Choosing the cheapest plastic option for a heavy caravan that genuinely needs a higher load rating. And storing a chock loose in a way that lets it crack or perish before it’s actually needed in an emergency.

What a cheap chock actually costs you long term

A sub-ten-dollar plastic wheel chock looks like the obvious choice on a shelf next to a properly engineered alternative, until it cracks under UV exposure after a season of caravan trips, or compresses and slips on a wet boat ramp when it matters most. The real comparison isn’t the price on the shelf, it’s the cost of replacing a failed chock every year or two versus buying a properly rated one once. This is the same logic that applies across Carewell’s entire range, industrial or personal, a chock specified to the actual load it needs to hold is cheaper over its working life than one that wasn’t.

Storage and care between uses

A wheel chock that spends most of its life sitting in direct sun in a tow vehicle’s tray degrades faster than one stored out of UV exposure between trips, regardless of material. Rubber and polyurethane both hold up better than basic plastic under repeated sun exposure, but all three benefit from being stored in a cover or toolbox rather than loose on a trailer deck. Checking a chock for cracking, flattening or perishing before each trip takes a few seconds and catches a failure before it happens on-site, not after.

Why Carewell for your personal vehicle, not just your fleet

Carewell Group is an Australian, privately owned business certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, building wheel chocks specified to actual load ratings for mining trucks, transport fleets and heavy industrial equipment. That same specification discipline applies to the personal vehicle range, your caravan, trailer, motorbike or car chock is engineered the same way, not a separate, lower standard simply because the vehicle is smaller. See our full wheel chock range and talk to our team for a quote matched to your actual vehicle and towing setup.

Carewell can meet your wheel chock needs for any vehicle, from a personal trailer through to a mining fleet. Talk to our expert and we will specify to your actual requirement. Call +61 (02) 8760 1491 or request a quote for your vehicle.

Pairing a chock with the right accessories

A wheel chock does one job well, stopping roll, but most caravan and trailer setups benefit from pairing it with the right accessories for the full job: a handle for easy placement and removal without bending under the chassis, a retrieval rope or chain for chocks used on a slope where reaching underneath isn’t practical, and a bright, visible colour that’s easy to spot and account for before towing off, a chock left behind on-site is a chock you don’t have for the next stop.

Getting a quote matched to your setup

Rather than guessing at a size off a shelf, tell Carewell your actual tyre size, vehicle weight and how you’ll use it, parked storage, regular towing, or workshop support, and we’ll specify a chock, or a custom one if a standard size doesn’t fit, matched to that. This is the same specification-first approach used across the entire Carewell range, applied to a single caravan chock just as it would be to a fleet order.

Frequently asked questions

What size wheel chock do I need for my caravan?
As a general rule, the chock height should be roughly 25% of your tyre’s overall height. Specify to your actual tyre size rather than a generic “caravan size” default.

Rubber, polyurethane or plastic, which is best for a caravan or trailer?
Rubber suits general use across most surfaces. Polyurethane suits heavier, more frequent towing. Plastic suits lighter trailers and occasional use.

Do I need two wheel chocks or one?
A pair is the safer standard, used on both sides of a wheel or across an axle, rather than relying on a single chock.

Can Carewell build a custom wheel chock for a non-standard trailer or vehicle?
Yes, the same custom engineering process used for our industrial and mining range applies to personal vehicle applications.

Sources

Written by Alif Vasaya, digital and content strategy, Carewell Group. Carewell Group is an Australian packaging, food packaging, tape, industrial safety and 3PL supplier serving all of Australia. Last updated 12 November 2026.

Tags :
Packaging
Share This :

Leave a Reply

Your email address will not be published. Required fields are marked *

REQUEST A QUOTE

REQUEST A QUOTE